Coffee mornings are the best part to levitate your all-day mood. And if the coffee is freshly made by yourself, indeed, it gives you butterfly swings. But how can you easily make such a serene cup? Of course, by having a coffee machine like Nespresso Inissia. Coffee making is your part, but to guide you on each and every detail is our responsibility, and we never cease to enlighten you.
Let’s get into all the related processing and programming relating to the Nespresso Inissia coffee machine so that you can become a coffee machine and coffee-making expert in no time.
Safety Precautions for Nespresso Inissia
Safety precautions should be an unforgettable thing. Do not think a minor and protective electronic device can not harm you. It’s always intelligent behavior to go through all the possible safety measures to be in a healthy condition. Guiding you on how you can protect yourself and refrain from the things that can lead to mishaps is our liability. That’s why I have formulated an easy and thorough Safety Precaution guide which you should read before using your Nespresso Inissia.
Energy saving mode is very effective in conserving electricity. If you were in a rush and remembered you forgot to turn off your brewer, then this programming is a go-go. To change the Nespresso Inissia energy-saving mode settings, here’s what you can do.
Instructions:-
Turn ON your machine by pressing either Espresso or Lungo button.
If you want to turn off your machine before it automatically turns off at its specific time (which is after 9 minutes as the default setting provides), then press both the Espresso and Lungo buttons simultaneously.
If you want to enhance the time of automatic turn-off from 9 minutes to more, then this is how you can do it.
Turn off the machine by pressing both the Espresso and Lungo buttons simultaneously.
Press and keep holding the Espresso button for 3 seconds.
The lights of the Espresso button will start blinking.
To change the setting, press the Espresso button once; it will change the setting to 9 minutes. Again pressing will change the settings to 30 minutes.
When you are done with the changes, Exit from the energy-saving mode by pressing and holding the Lungo button for 3 seconds.
How to First Use Or After A Long Period Of Non-Use?
If you are totally unaware of brewing coffee from a coffee machine like Nespresso Inissia, then follow the steps and fill your cup with warm, deliciousness.
Instructions:-
Remove the water tank from the machine.
Rinse and clean it
Fill Nespresso Inissia water tank with fresh water.
Put a container of a minimum of 1 liter under the coffee outlet.
Plug the cord into the power socket
Turn ON your machine by pressing either Espresso or Lungo button.
All the coffee lights will start blinking, ensuring the pre-heating phase has started.
The heating phase will last for approx. 25 seconds then the lights will stop blinking and become steady.
Now to internally rinse the machine, press the Lungo button one time.
The water will start flowing into the placed container.
When the flow stops, discard the container water and repeat point 9 three times.
Your machine is now ready for brewing.
How to prepare Coffee using Nespresso Inissia
After preparing your machine for the coffee, now it is time to brew delicious coffee for yourself. Here you can do it.
Instructions:-
Turn ON your machine by pressing either Espresso or Lungo button.
All the coffee lights will start blinking, ensuring the pre-heating phase has started.
The heating phase will last for approx. 25 seconds then the lights will stop blinking and become steady.
Rinse and fill your water tank with fresh drinking water.
Lift the machine lever
Insert your coffee capsule into the capsule compartment
Close the lever
Place a mug according to the type of beverage you are brewing under the coffee outlet.
To brew the Lungo, press the lungo button. The size for Lungo is 110 ml
To brew the Espresso, press the Espresso button. The size for Espresso is 40 ml.
The coffee will start cascading into the cup. The flowing process will automatically stop when the set brew size is reached.
Remove the used capsule by lifting and lever and closing it again.
The used capsule will fall into the used capsule container.
Program the water volume in Nespresso Inissia
Nespresso Inissia gives you the leverage to change the volume setting of your beverages. You can change either the Lungo or Espresso button depending on your liking.
Here are the steps to follow to program the water volume settings of your Nespresso Inissia
Instructions:-
Turn on your machine by pressing either Espresso or Lungo button.
All the coffee lights will start blinking, ensuring the pre-heating phase has started.
The heating phase will last for approx. 25 seconds then the lights will stop blinking and become steady.
Fill the water tank with freshwater.
Insert your capsule by lifting the lever
Close the lever after inserting the capsule into the capsule compartment
Place a cup under the coffee outlet.
Press and hold the coffee button whose water volume you want to change
The coffee will start pouring into the mug. Keep pressing until you get the desired volume. Release the button once you achieve it.
The water volume has changed now.
How to empty the system of Nespresso Inissia
If you want to empty your brewer for any reason, such as to send it for repair or to store it for some time, for frost protection, or during shifting, etc. Here you can do it.
Instructions:-
Turn off your machine if it is not by simultaneously pressing Espresso and Lungo buttons.
Remove the water tank from the brewer.
Lift the lever
Again press the Lungo and Espresso button simultaneously for three seconds.
The Lungo and Espresso lights will start blinking alternatively.
Close the lever
After the emptying process ends, the machine will turn off automatically
Lastly, empty the used capsule container and drip tray as well.
How to reset the Nespresso Inissia to factory settings
If you have made changes in the settings of the Nespresso Inissia and want to reset it to factory settings, then this is how you can do it.
Factory settings
Espresso cup
40 ml
Lungo cup
110 ml
Power off mode
9 min.
Instructions:-
Turn off your machine by simultaneously pressing Espresso and Lungo buttons.
Press and hold the Lungo button for 5 seconds.
The machines will reset to the factory setting as the coffee button lights start blinking three times.
After this, the coffee button will generally continue to blink, ensuring the pre-heating phase is continuing.
Descaling Nespresso Inissia
Descaling should be an unforgettable step as your brewer’s maintenance, and good working condition depends upon it. It also enhances the coffee quality and quality. It only takes 15 minutes, and its positive effects can last upto 600 coffees or 6 months. To descale your Nespresso Inissia, here are the steps below.
Instructions:-
Turn on the machine by pressing either Espresso or Lungo button.
First thing first, remove the capsule from the machine by lifting the lever and closing it again. It will make the used capsule fall into the used capsule container.
Also, empty the drip tray and the used capsule container.
To start the descaling process, get your Nespresso Descaling Liquid Sachet and pour one whole sachet into the water tank.
Pour 0.5 liter or 17 ounces of fresh water into the water tank.
Mix the descaling solution and water nicely.
Place the container of about 1 liter or 34-ounce volume under the coffee outlet.
To get the machine into the descaling mode, press the Lungo and Espresso buttons for about 3 seconds.
The coffee button lights will start blinking, ensuring the machine is now in descaling mode.
Press the lungo button one time, don’t keep holding it.
You will see the mixture will start pouring into the placed container.
When the pouring stops, you will see the water tank is empty.
Refill the tank with this same used descaling solution poured into the container.
Repeat point 10 one more time.
After this, drain the used solution, rinse and clean the reservoir.
Fill the reservoir with fresh drinking water.
Rinse the machine two times with clean water by repeating point 10.
Now press and hold Espresso and Lungo buttons for 3 seconds to exit the descaling mode.
The coffee button lights will start blinking, ensuring the pre-heating phase is going on, which lasts approximately. 25 seconds.
After this, the lights will stop blinking, and your brewer will be clean and ready to brew.
Remember! You should not let the descaling solution come in contact with sensitive skin areas, wounds, eyes, etc.
Descaling Frequency Table
The descaling frequency table is a water hardness-based table used to know the descaling frequency required for optimum machine performance.
Water Hardness
Descaling After
French Degree (fH)
German Grade (dH)
Calcium Carbonate(CaCO3)
Cups (40ml)
36
20
360mg/l
1000
18
10
180mg/l
2000
0
0
0mg/l
4000
Cleaning your Nespresso Inissia
Besides descaling, it is essential to keep the brewer’s outer appearance neat and clean. Not only does its shine and design keep your surroundings elegant, but cleaning also keeps the brewer’s outer covering in good quality. Here are the things you should do for cleaning.
Instructions:-
For cleaning, you should never put your brewer’s part in the water or dishwasher.
Clean the brewer’s outer covering and parts, such as the coffee outlet, with a soft, damp cloth.
Remove the drip tray, water tank, and capsule container from the machine, empty, rinse, and clean them.
You should not use a potent cleaning agent to clean the outer covering; instead, use a mild cleaning agent.
Troubleshooting the Nespresso Inissia
Malfunctioning can often occur, which causes defiance in brewers working. However, you should not worry about it; you can find and solve the issue without taking your machine to the repair center. Let’s discuss the common troubleshooting you often face with Nespresso Inissia.
No.
Problems
Solutions
1.
If your brewer is not providing any water or coffee to you, then try →
Fill the water tank with water (at a maximum temperature of 55 degrees Celsius).Run this warm water through the machine by pressing the Lungo button.
Check the water tank and fill the tank if necessary.
Descale your brewer
Contact Nespresso Club
2.
If the indicator lights are not working, then
Check the main plug, power source, voltage, and fuse.
Contact Nespresso Club
3.
If your coffee comes out very slowly, then
Descale your brewer
Also, remember coffee speed depends upon the coffee type you are brewing.
4.
If you see any water in the capsule compartment
Try to reposition the capsule in the correct posture.
Contact Nespresso Club
5.
If your coffee does not come out hot enough
Preheat your coffee mug or cup
Descale the brewer if required.
6.
If you see only water pouring out into the mug, even when there is a capsule in the capsule compartment.
Contact Nespresso CLub
7.
If the brewer’s LED lights are blinking irregularly, then
Send your brewer to the Service Center orContact Nespresso Club
Contact the Nespresso Club
To solve the problems with your Nespresso Inissia machine, contact the Nespresso Club or Nespresso authorized representatives anytime.
Countries
Contact Numbers
Nespresso Inissia USA
800-566-0571
Nespresso Inissia CA
1800-019-090
Nespresso Inissia UK
0808 100 8844
Nespresso Inissia AUSTRALIA
1800 623 033
Nespresso Inissia NEW ZEALAND
0800 234 579
You can check out their website Nespresso.com or directly contact them by dialing their numbers.
Disposal and Environmental Protection by Nespresso Inissia
Nespresso Inissia contains the eu Directive 2023/96/eC. The packaging material that makes the brewer’s parts recyclable. You can even learn the disposal information of your brewer from your local disposal authority. The ability to get recycled will surely save the earth from severe pollution.
Limited Warranty
Nespresso Inissia Manufacturer Breville provides a warranty to its users. And the warranty on the machine is applied when your machine is not excluded from the following guarantee rules.
The Breville will repair or replace your machine without charging you any penny only if there is no defect in the materials and it has been used domestically for 2 years or commercially for 3 months from its purchase date.
The repaired or replaced material during the guarantee period will expire one year from the original product bought to date, not the date of repair/replacement.
Any consequential loss from this brewer or damage done by this brewer to your property would not get a guarantee from the manufacturer.
If the defect is caused by not using the product according to the given instructions, accidental damage, misuse, and improper maintenance, the warranty will not cover the repair cost.
If you believe your machine follows the above rules and is applicable for repair, contact the Nespresso Customer Service team.
Note: Breville provides a warranty on this product, which is imported and distributed by Breville too. Nespresso has no liability for the product. All the guarantees, warranties, and conditions by Nespresso are excluded.
Using the Nespresso machine is very easy. There is no complex programming system; after turning on your brewer, you just have to press the desired coffee button. Let’s see how you can use the Nespresso machines.
Turn on the brewer; the Nespresso brewer turns on differently. Some have an ON/OFF button; some need simultaneous button hold.
Fill your water tank with fresh drinking water.
Place the container under the coffee outlet
Insert capsule
Select the beverage button, and in a second, your coffee will start pouring into the mug/cup.
How do you set up Nespresso Inissia?
If you have bought the machine or have been using it for a long time, here you can do to set and prepare your brewer for brewing
Remove the water tank from the machine.
Rinse and clean it
Fill the Nespresso Inissia water tank with fresh drinking water.
Put a container of a minimum of 1 liter under the coffee outlet.
Plug the cord into the power socket
Turn ON your machine by pressing either Espresso or Lungo button.
All the coffee lights will start blinking, ensuring the pre-heating phase has started.
The heating phase will last for approx. 25 seconds then the lights will stop blinking and become steady.
Now to internally rinse the machine, press the Lungo button one time
The water will start flowing into the placed container.
When the flow stops, discard the container water and repeat point 9 three times.
Your machine is now ready for brewing.
What are the 3 buttons on Nespresso?
The three buttons on Nespresso machines are the ON/OFF button, the Lungo button, and the Espresso button.
Does Nespresso Inissia make regular coffee?
No, you cannot make regular coffee with Nespresso Inissia. However, you can make Espresso and Lungo with it.
